Avid Technology AirSpeed series Installation And User Manual Download Page 203

Page: 203 / 282

User Interface

203

Main Menu

Located at the top of the application, the Main menu contains the following menus:

•

File

•

About

For more information, see each of the menu topics.

•

For information on the File menu, see

File Menu

•

For information on the About menu, see

About Menu

File Menu

The File menu contains the following submenus. Each is described in the following table:

File Menu Submenus

Option

Description

Connect

Enables you to connect to an AirSpeed Multi Stream server to view
Channel and Inventory. For more information, see

“Connecting to an

AirSpeed Multi Stream Server” on page 200

Exit

Closes the AirSpeed Multi Stream Remote Client application and exits to
the Windows desktop.

Summary of Contents for AirSpeed series



























































































































































































































































































Search results

Summary of Contents for AirSpeed series

Reviews:

Related manuals for AirSpeed series

Brands by name

Popular brands

Avid Technology AirSpeed series, Installation And User Manual

Search results

Summary of Contents for AirSpeed series

Reviews:

Related manuals for AirSpeed series

Brands by name

Popular brands