Avid Technology AirSpeed Multi Stream, Installation And User Manual

Page: 315 / 398

Using the AirSpeed Multi Stream Remote Console
315
Setting Loop Behavior in the Playlist
This topic contains information on how to toggle the Playlist between Loop On and Loop
Off.
The default is set to “Off”.
To set loop behavior in the Playlist:
t
Click the
Loop
button.
- If the button text is Green, it indicates Loop On.
- If the button text is black, it indicates Loop Off.
Working with Clips in the Playlist
This topic contains all the tasks that you can perfrom when working with clips in the
Playlist. The following tasks are included:
• “Reordering Clips within the Playlist” on page 315
• “Modifying Mark In/Mark Out Points for Clips in the Playlist” on page 316
• “Setting the Follow Behavior for Clips in the Playlist” on page 316
• “Deleting Clips from the Playlist” on page 317
• “Taking Control of a Playlist for a Channel” on page 314
• “Cueing a Playlist” on page 317
• “Cueing From a Specific Clip in the Playlist” on page 317
• “Playing Clips in the Playlist” on page 318
• “Pausing Clips in the Playlist” on page 318
• “Stopping and Unloading Clips in the Playlist” on page 318
Reordering Clips within the Playlist
This topic contains information on how to reorder clips within the Playlist.
To reorder clips within the Playlist:
t
Select a clip that you want to reorder in the Playlist, and drag it from one location and
then drop it into the new location in the Playlist.