AVID Products, Inc.
20
NOTE
>
If the AE-350W
(1)
stop receiving a signal while in wireless mode, the
AE-350W
(1)
will turn off automatically after 15 minutes following the
voice message “Power OFF”.
>
The next time you turn on the AE-350W
(1)
, they will automatically
connect to the wireless device they were previously paired with. After
you hear the message “Power ON”, the process of reconnecting will
begin and a few seconds later you should hear the voice message
“Your Device is Connected”. If your wireless device is not turned on or
out of range, the earphones will automatically go into the pairing mode
and you will hear the voice message announce “Pairing”.
>
Use the pairing button
(6)
whenever you want to turn to another
wireless device while your current device is still active. Press it for about
3 seconds and it will disconnect from the current device and the voice
message will announce “Pairing”. Follow the same steps described
above and when pairing to the new device is completed you will hear
the voice message announce, “The device is connected”.