8
Unique lighting solutions.
Safety Information
FUNCTIONAL ADVICE
CONTROL
LED LIFETIME ADVICE
1. Do not hot switch connections, ensure power is off when
connecting supplies.
2. Check supply voltage. If unsure contact licensed electrician
and/or AVID Labs
®
3. Product must be checked by a licensed electrician prior
to commission.
4. Where code requires, ducting may be ran to the rear of the unit.
The ducting should be installed by a licensed electrician.
LED lifetime is determined by the gradually declining brightness
of an LED over time where, the point of 70% brightness reduction
marks the defined end of its lifetime. The driving factor of this
effect is the heat that the chip inside the unit is exposed to. While
an LED may reach 100,000 hours under ideal circumstances, the
real-world lifetime may be 60,000 hours. This may be less if
the LED is exposed to excessive heat, which can be caused by
continuously running the LED inside this device at full power
and operating the unit in high environmental temperatures. If
improving the lifetime of the LED is a concern, keeping the
operating temperature lower is advised. This may include forced
air external cooling and/or the reduction of overall intensity.
2.
RGBW - 7 Conductor cable,
Orange Power 24VDC +,
Blue Power 24DC-,
Green DMX +,
White DMX +,
Red DMX-,
Black DMX -,
Drain Wire DMX common.
Minimum voltage for the product is 24V.
Standard Fixed Color - the unit has a third line in allowing a
PWM signal to be send to the internal drive. This signal controls
the dimming of the driver. The driver will run at full power despite
voltage drops without a signal. Minimum voltage for the product
is 12V.
1.
