Parts and Tools Required
The following parts and tools will be used in Section 4.1
QTY
Part/Description
Packaged In
3
NEMA 23 Motor
Electronics
3
CRP201-09 - NEMA 23 Motor Pulley
CRP320-00-S375-19.1
3
R&P Drive Plate
CRP320-00-S375-19.1
3
CRP325-00 - PRO NEMA 23 Spindle Assembly
CRP320-00-S375-19.1
3
CRP320-00-FAST-375:
CRP320-00-S375-19.1
- (4) M5 x 14mm Socket Head Cap Screw (Total QTY: 12)
- (4) M5 Hex Nut (Total QTY: 12)
- (1) NEMA 23 R&P Drive Belt (Total QTY: 3)
- (1) 5/16" Flat Washer (Total QTY: 3)
- (1) M6 x 22mm Socket Head Cap Screw (Total QTY: 3)
- (1) Cam Tensioner (Total QTY: 3)
Remaining parts from this kit used in Section 4.3
Note: The fastener kit part number listed above is applicable for NEMA 23's with the default 3/8" shaft. If you purchased the 1/4" shaft
version, your fastener kit part number will be CRP320-00-FAST-250-19.1 and your Rack & Pinion Drive parts will be located in the box labeled
CRP320-00-S250-19.1.
Required Tools:
- 3/32" Allen Wrench
- 1/4" Allen Wrench
- 4mm Allen Wrench
- 5mm Allen Wrench
- Adjustable Wrench
- Tape Measure
Recommended Additional Tools:
- 16mm Combination Wrench
PRO60120
Assembly Instructions
Version 2020Q1.2
© 2020 Avid CNC
All Rights Reserved
