8.1 Next Steps for Routing Machines
1. If you purchased a router or spindle mount, follow the Router and Spindle Mount Assembly Instructions
(https://www.avidcnc.com/support/spindles/router-spindlemount).
2. If you purchased an Avid CNC Plug and Play CNC Control System, the CRP800-00E CNC Controller Technical Manual
(https://www.avidcnc.com//support/electronics/CRP800-00E) provides setup and use instructions.
3. If you purchased an Avid CNC 2.2kW Plug and Play Spindle/VFD System, follow the VFD Setup Guide
(https://www.avidcnc.com/support/spindles/spindle-vfd) (choose the appropriate guide for your control system
electronics).
4. The next step to get your machine up and running will be to setup your CNC software. Our CNC Software Setup Guide
(https://www.avidcnc.com/support/software) provides step-by-step instructions to install and configure Mach4 for your
specific machine configuration.
5. Once your machine is setup and ready to cut, it is recommended to follow the Leveling, Squaring, and Tramming
Instructions (https://www.avidcnc.com/leveling-squaring-and-tramming-your-cnc-machine-p-438.html) to calibrate your
machine for consistent and reliable results.
6. Our Spoilboard Project (https://www.avidcnc.com/cnc-spoilboard-p-425.html) includes plans and instructions to help you
make a spoilboard specific for your Benchtop PRO CNC machine.
Benchtop PRO
Assembly Instructions
Version 2020Q2.1
© 2020 Avid CNC
All Rights Reserved
