23
Cowl Installation:
Once the engine is mounted its
time to start cutting out the cowl
to clear the mufflers and also al-
low for cooling. Make sure you
have plenty of room around the
pipes so vibration will not cause
any cracks in the cowl. You will
need to cut out a generous
amount from the cowl to provide
cooling for your engine.
Wing attachment:
Slide the wings onto the tube
and into the pockets in the fuse-
lage. Now take the 1/4x20 nylon
bolts provided and thread them
into the wing root. Make sure you
have two bolts per wing as well
as making sure they are tight be-
fore each flight.
Canopy mounting:
Mount the canopy using your pre-
ferred glue and or screws. A tiny
hole drilled into the pilot area in the
back corner will prevent fogging and
pressurization. Painting frame lines
is optional. If you want to paint
them on the inside of the canopy, do
it before you glue it
