- 30 -
Clock and Alarm Function
Setting the Clock
Press the TIME button on the remote control or the TIME/ENT button on the front
panel, the Hours display will start to flash.
Use the
direction buttons to select the correct hours (note the am and pm
indicators).
Press the
button, the Minutes display will start to flash.
Use the
direction buttons to select the correct minutes.
Press TIME or the TIME/ENT button again to finish.
Alarm Setup
Press the SET button on the remote control or the front panel to enter ALARM SET
menu, the screen will display as below:
Use the
direction buttons to select the item you want to set.
Use the
direction buttons to enter the item and to select.
Press the SET button again to exit from the setup menu.
Alarm
Use the
direction buttons to select ON or OFF. This function allows you to set the
alarm clock time of this unit.
To set the alarm clock time, first press any number button to enter the time input state.
Then use number buttons to input the desired alarm time in sequence of hour, minute.
Press the
direction buttons to switch between am and pm.
You can silence the alarm in three ways: (1) Press any key on the front panel for a
longer moment. (2) Press OK button on the remote control. (3) Set the Alarm to OFF
in the ALARM SET menu.
If no key is pressed the alarm will stop after three minutes.
ALARM SET
ALARM
ON
ALARM _ _: _ _ am
EXIT: SET
Summary of Contents for AVI61006
Page 1: ...MHZ AVI61006...
