- 28 -
TV Function
Basic Operation
Connect the antenna to the antenna jack on the rear panel. After connecting the
antenna, connect the power supply cord. If the player is in standby mode, press the
POWER button on the front panel to turn on the power.
Press the TV button on the remote control to shift to TV mode.
Press the
direction buttons to select the desired channel. To go to a channel
directly, first press the number buttons on the remote control for input and then press
the OK button for confirmation. You may also wait for a moment without pressing the
OK button and the unit will go to the selected channel.
Some preferences can be preset:
TV System Setup
Press the LCD SETUP button to enter the PICTURE setup menu, and then press the
button, the TV system setup menu will appear:
System
Use the
direction button to select TV system type.
Channel
Use the
direction button to change the TV channels.
Skip
When the
direction button is pressed to turn the function ON, it will skip the current
channel when using
CH+ or
CH- button to select TV channels. When the
direction button is used to turn the function OFF, it will play the channels in sequence
when selecting under normal playback status.
TV SETUP
SYSTEM PAL B/G
CHANNEL
001
SKIP
ON
SWAP ---
BLUE SCREEN ON
FINE TUNING
AUTO MEMORY
Ż
PICTURE EXIT
Ź
Summary of Contents for AVI61006
Page 1: ...MHZ AVI61006...
