AVG-SC41T-CODEC
2. Panel Description
2.1. Transmitter Front Panel
①
POWER LED:
The LED illuminates red when power is applied, or orange when
the auto-switching mode is selected.
②
INPUT LED & SOURCE SELECTOR:
1-HDMI:
The LED illuminates green when 1-HDMI input signal is selected.
2-HDMI:
The LED illuminates green when 2-HDMI input signal is selected.
3-DP:
The LED illuminates green when 3-DP input signal is selected.
4-VGA:
The LED illuminates green when 4-VGA input signal is selected.
RX HDMI:
The LED illuminates green when the HDMI input signal on Receiver
is selected.
SOURCE SELECTOR:
Press this button to select the source signal, or long-
press for 3 seconds or more to enable auto-switching mode.
For more details, please refer to section
4. Button Control
.
③
DISPLAY CONTROL:
Press this button to toggle power to the displays. The LED
will illuminate green to reflect the state.
④
RETURN:
Return key used for the OSD.
⑤
MENU / ENTER:
Menu or Enter key for OSD.
⑥
VOL - / MUTE:
Press this button to turn down the audio output volume, or long-
press 3 seconds or more to mute / Left key for OSD.
⑦
RELAY 1:
Press this button to roll up the projection screen. / Up key for OSD.
⑧
RELAY 2:
Press this button to drop the projection screen. / Down key for OSD.
⑨
VOL +:
Press this button to turn up the audio output volume. / Right key for OSD.
Note:
Pictures shown in this manual are for reference only, different model and
specifications are subject to real product.
RX HDMI
SOURCE
AUTO/3s
1-HDMI 2-HDMI
4-VGA
3-DP
OFF
DISPLAY
ON
MENU
ENTER
RETURN
RELAY 1
VOL +
VOL -
MUTE/3s
RELAY 2
1
2
3
4
5
6
8
7
9
