AVG-SC41T-CODEC
4.3.1. Installation/Removal of RS232 Control Software
Installation:
Copy the control software file to the computer connected with
the AVG-SC41T-Codec transmitter.
Uninstallation:
Delete all the control software files in corresponding file path.
4.3.2. Basic Settings
To begin with, connect the AVG-SC41T-Codec with all your input devices and output
devices required, then connect it to a PC which has some RS232 control software
installed. Double-click the software icon to run the software.
Here we have the software
CommWatch.exe
as an example. The icon looks like the
image below:
The interface of the control software is shown below:
Please set the parameters of COM port, baud rate, data bit, stop bit and the parity bit
correctly, and then you can successfully send commands in the Command Sending
Area.
Parameter
Configuration area
Monitoring area,
indicates whether the
command sent works.
Command Sending
area
