AVGear AVG-HD300, User Manual

Page: 5 / 13

AVG-HD300
1. Introduction
1.1 Introduction to AVG-HD300
AVG-HD300 is an HDMI/IR/RS232 Extender operating over twisted pair and
includes a transmitter (AVG-HD300T) and receiver (AVG-HD300R). The AVG-
HD300 uses HDBaseT technology to deliver HDMI signals, max transmission
distance up to 60 meters with CAT5e/CAT6 cable. CEC, bi-directional RS232&IR
control, and PoC (Power over Cable) are supported by the AVG-HD300.
1.2 Features
Supports Full HD: Delivers resolutions including 800x600@60Hz,
1024x768@Hz, 1280x720@60Hz, 1280x1024@60Hz,
1366x768@60Hz, 1600x1200@60Hz, 1920x1080@60Hz,
1920x1200@60Hz, 3D, 4K×2K
Max transmission distance is up to 60 meters over single CAT5e/CAT6
cable.
High Bandwidth: 10.2Gps.
HDTV Compatible, use HDMI 1.4 and HDCP compliant.
Supports PoC & CEC.
Connect with a displayer to transmit EDID and HPD signals constantly
by using a CAT5e cable.
Uses HDBaseT technology.
Bi-directional RS232/IR control.
LED indicators show work status.
Wall/table-mountable aluminum enclosure, PT case design.
Note: Please use a CAT5e cable with low impedance (Shielded twisted pair
will be better and should be well grounded) for good transmission characteristics.
2. What’s in the Box
1 x AVG-HD300T
1 x AVG-HD300R
4 x Mounting brackets (Separated from AVG-HD300)
8 x Plastic cushions
2 x RS232 cables
8 x Screws
2 x Power adapters (DC 24V)
1 x User manual
Note: Please confirm that the product and the accessories are all included, if not,
please contact your dealer.