AVGear AVG-CSK-HD44 User Manual Download Page 3

Page: 3 / 44

AVG-CSK-HD44 KIT

SAFETY OPERATION GUIDE

To guarantee the reliable operation of the equipment and safety of the user, please
abide by the following procedures in installation, use and maintenance:

The system must be earthed properly. Please do not use two blade plugs and

ensure the alternating power supply ranges from 100v to 240v and from 50Hz to

60Hz.

Do not install the product in an environment where it will be exposed to extreme

hot or cold temperatures.

This unit will generate heat during operation, please ensure that you allow

adequate ventilation to ensure reliable operation.

Please disconnect the unit from mains power if it will be left unused for a long

time.

Please DO NOT try to open the casing of the equipment, DO NOT attempt to

repair the unit. Opening the unit will void the warranty. There are high voltage

components in the unit and attempting to repair the unit could result in serious

injury.

Do not allow the unit to come into contact with any liquid as that could result in

personal injury and product failure.

Summary of Contents for AVG-CSK-HD44













































Search results

Summary of Contents for AVG-CSK-HD44

Reviews:

Related manuals for AVG-CSK-HD44

Brands by name

Popular brands

AVGear AVG-CSK-HD44, User Manual

Search results

Summary of Contents for AVG-CSK-HD44

Reviews:

Related manuals for AVG-CSK-HD44

Brands by name

Popular brands