32
OPERATING THE HOOD (continued)
Controls (continued)
:
•
Adjusting the timer function:
•
While the blower is not running, press and hold
Decrease
(-) button over three (3) seconds to
enter timer mode. Adjust to desired time by pressing the
Increase
(+) or the
Decrease
(-)
button (for minimum of 1 minute to a maximum of 9 minutes). This setting will be saved
immediately.
•
Activating the timer function:
•
While the blower is running, press and hold the
Power
button for over three (3) seconds to
activate
Power-off Delay Digital Timer
. The
Power-off Delay
indicator will light up and
Power-
off Delay Digital Timer
will begin to countdown; when it reaches zero, the blower will shut
down.
•
Adjusting the light:
•
Press
Light
button once to turn lights on and once again to turn lights off.
•
While the lights are off, press and hold
Light
button for over three (3) seconds to adjust the
intensity of the lights. The level of brightness will be stored in system
’
s memory.
CAUTION
:
DO NOT touch the lights until switched OFF and cooled
.
Note
:
Light settings are independent from other settings (including power-off delay) and lights have to be
manually turned on or off.
Note
:
The system saves user configurations. Settings such as light, timer and blower speed will remain the
same the next time it is turned on.
