Avery Weigh-Tronix ZK810 User Instructions Download Page 18

Page: 18 / 34

ZK810 Counting Scale User Instructions

Indicator applications

a. The display will show the correct number of parts on the scale and the

COUNT

annunciator is lit.

If the sample weight was not enough,

PcE WtL

will be displayed

briefly and then return to weight mode.

If the weight was unstable,

tMout

is briefly displayed and the display

returns to gross weighing mode. The

TARE

key can be used to abort

the sampling process, if necessary.

Place the parts on the scale to be counted.

3.2.6 Counting in bulk mode

With the count application in bulk mode active, follow these steps to count:

Press

ZERO

to zero the scale, if necessary.

Use a tare method to tare a container, if necessary. See

Net weighing on page

Press the

SAMPLE

key…

SAMPLinG

is briefly displayed. This means the indicator is zeroing

itself. A message,

Add

, is then displayed.

is the current sample

size.

4a.

Place

number of items on the scale.

4b.

Press the

SELECT

key repeatedly to scroll through other sample size choices

(5, 10, 25, 50 or 100). When your choice is displayed, place all the sample on
the scale at one time …

buSY

is briefly displayed, followed by one of two possible outcomes:

a. If the weight is stable, the display will show the correct number of parts

on the scale and the

COUNT

annunciator is lit.

If the sample weight was not enough,

PcE WtL

will be displayed

briefly and then return to weight mode.

If the weight was unstable,

tMout

is briefly displayed and the display

returns to gross weighing mode. The

TARE

key can be used to abort

the sampling process, if necessary.

If you do not place a sample on the scale within five minutes of selecting the sample
size, the display will show

tmout

(timeout) and return to the gross weight screen.

Summary of Contents for ZK810



































Search results

Summary of Contents for ZK810

Reviews:

Related manuals for ZK810

Brands by name

Popular brands

Avery Weigh-Tronix ZK810, User Instructions

Search results

Summary of Contents for ZK810

Reviews:

Related manuals for ZK810

Brands by name

Popular brands