Avery Weigh-Tronix WPI-135, Service Manual

Page: 12 / 75

12
User
—SET
—ACCUM
User
—SET
—PCWT
User
—VIEW
User
—VIEW
—VERS
If you press the ACCUM soft key, follow these instructions:
1. The display shows you the
current GROSS TOTAL in the
accumulator. You can change
this by keying in a new number
and pressing ENTER or press
ENTER to move to the next
ACCUM value. . .
The display shows the NET TOTAL
value.
2. Repeat step 1 for NET TOTAL,
COUNT TOTAL, and
TRANS(action) TOTAL. . .
The display returns to the USER-
SET screen.
If you press the PCWT soft key the display shows the current value for the
piece weight. Accept this by pressing the ENTER key or key in a new piece
weight and press ENTER.
Press the EXIT key to return to the User menu soft key group.
Press the VIEW soft key to access the User-VIEW soft key group:
VERS Press this key to see WPI-135 firmware part number, revision
information (time, date and revision letter), serial number, Xilinx
part number and revision, and information about a downloaded
SimPoser program (license number, company name, version
number, name of file and time and date downloaded.
SEAL Press this key to view/set the condition of the physical seal
setting.
VARS Press this key to view the BASIC variables.
STORES Press this key to view the numeric and string values used with
store and recall.
COUNT Press this key to view the calibration and configuration audit
counters.
Following is a detailed description of the functions listed above.
If you press the VERS soft key you will see the following information:
• Firmware version
• Part number and revision level
• Serial number of the indicator
• XILINX version
• XILINX part number
• XILINX revision level