16
With the printer in the setup menu and with
CONFIGURE . . . [NEXT/OK] as the last item
printed, press
OK (right side) to access the configure
menu. The following is printed:
LOAD DEFAULTS gives you the opportunity to reset
the printer to all default settings (shown below).
Choose
OK to do this or NEXT to go to the next
parameter. The following is printed:
Baud rate is the next parameter you can set in the
configure menu. The complete list of parameters and
their possible values is shown below.
The sample list above shows the current baud rate is
1200. To accept this, press
OK (right side) or view
the next baud rate value by pressing
NEXT (left side).
Press OK when the baud rate you want is displayed.
Choose from these baud rates;
300, 600, 1200, 2400, 4800, 9600, or 19200
DATA BITS is the next parameter. Choose the data
bit value the same way baud rate was chosen.
Choices are 7 or 8 data bits.
Load Defaults
Baud Rate
Data Bits
