15
To access the setup menu follow these steps:
1. Unplug the printer either at the outlet or at the
back of the printer.
2. Press and hold down the left side of the rocker
switch and plug in the printer. The printer will
advance the paper. After the paper advance has
stopped, count 3-5 seconds and release the
switch. The following is printed:
If you wait less than three or more than five seconds
Ready. . . is printed and you will have to try steps 1
and 2 again to access the setup menu.
After you access the setup menu, if you press
NEXT
(left side of switch) repeatedly you will see the
following list printed. If you keep pressing
NEXT (left
side) the list repeats itself.
As you can see form the above printout the setup
menu contains the following items:
• CONFIGURE menu
• CUSTOM menu
• SET CLOCK menu
• RESET SEQ#
The following pages explain these items and how to
customize the printer to your needs.
The first setup menu item reads
CONFIGURE . . . [NEXT/OK]
[NEXT/OK] is a visual clue so you know that
pressing the left side of the rocker switch will go to
the
NEXT part of the menu and that pressing the right
side of the rocker switch will accept (or say
OK to)
what this line of the setup menu says.
Accessing the
Setup Menu
CONFIGURE. . .
This manual
assumes the time
and date option
are installed and
operating. If you do
not have this
option you will not
see references to
the clock or date
listed in most
menus.
