Eyecon 9420 Quick Reference Guide
5
Quick Reference Guide
Below is a table showing all the settings, choices and brief explanations for each. For
more information see the User Instructions (PN AWT35-501651).
Rx validation
Ensures the proper medication is dispensed by
validating the drug number included in the barcode
on the patient vial label or Rx pamphlet matches the
drug number associated with barcode on the stock
item.
1.
From the
START
screen press
Validation
,
shown at right.
2.
Scan or enter User ID if SCAN USER LOGIN is enabled.
Eyecon 9420 Configuration Manager
Main Menu Item
Description
General
Access this to see information about the 9420, enable or disable the Auto Close
Recorded Message, Drug Substitution, Stock Item Verification, Allow an Under-
fill or Over-fill and to calibrate the platter.
Barcode
Access this to set the Barcode Type, lengths, offsets, to enable or disable the
Rx Scan in Count Mode and to enter the Barcode Test Mode.
Data
Access this to set the Transaction Purge Time, Delete Report Data and see the
Tray Photo Count.
TCP/IP
Use this to access the TCP/IP settings
Pharm. Mgmt. SW
Access this to setup an interface between Eyecon and your pharmacy system.
Remote Server
Access this to configure the Eyecon to send Rx fill results back to your
pharmacy system.
Multi-Eyecon
Access this to manage communication among multiple connected Eyecons
Double Check
Access this to set up double counts and back counts.
Login/Scan Out
Access this to set up user login and scan out parameters.
Test
Access this to test the scanner, camera, touchscreen and speaker.
Auto Updater
Access this to manage updates for the Eyecon.
Trained Drugs
Access this to import or export the trained pill images to or from this Eyecon.
Backup/Restore
Access this to backup and restore the database or configuration.
Inventory
Access this to manage inventory data.
For additional information, reference the Instruction Manual or call 866-260-6540.
