AWB 120 Bench Scale User Instructions
17
3.3 Net Weighing Using a Tare
3.3 Net Weighing Using a Tare
To perform a net weighment using a tare, follow these steps:
1.
Press the
Zero
key to zero the scale…
0
is displayed and the
ZERO
annunciator lights.
2.
Place the container to be tared on the scale.
The gross weight is displayed.
3.
Press the
Tare
key…
0
is displayed and the
NET
annunciator lights.
4.
Place the item(s) to be weighed in the container.
The net weight is displayed.
5.
Remove the items from the scale.
6.
Repeat steps
1
through
5
.
3.3.1 Removing a Tare
To remove the tare value from the scale, empty the scale and press the
Tare
key.
3.4 Checkweighing
Checkweighing is a function that allows you to enter an upper and lower acceptable
weight for a product or item that must be checked for weight conformity. After you set
the limits of the acceptable target weight you can choose one of three modes of beeper
operation:
Beep when OK
(
OK)
When the weight on the scale is between the upper and lower limits, the
ACCEPT
annunciator lights and the beeper sounds. When the weight is outside
the acceptable range, the OVER or UNDER light will illuminate.
Beep when no good
(
NG
)
When the weight on the scale is between the upper and lower limits, the
ACCEPT
annunciator lights. When the weight is outside the acceptable range,
the OVER or UNDER light will illuminate and the beeper sounds.
No beep (
NO
)
When the weight on the scale is between the upper and lower limits, the
ACCEPT
annunciator lights. When the weight is outside the acceptable range,
the OVER or UNDER light will illuminate. The beeper does not sound during
checkweighing when this is chosen.