background image

 

 

 

 

Contact Information

 

Purex International Ltd (UK)

 

Purex House, Farfield Park, Manvers 

Rotherham 

South Yorkshire 

S63 5DB 

Web: www.purex.co.uk 

Tel: +44 (0)1709 763000 

Fax: +44 (0)1709 763001 

E-mail: [email protected] 

 

Hours of Operation

 

Monday-Thursday 8.00am to 5.30pm 

Friday 8.00am to 2.00pm 

 

Purex Inc.

 

2246 Palmer Drive, Suite 108 

Schaumburg 

Illinois 60173 

United States 

Web: www.purexinc.com 

Tel: +001 866 360 5675 

E-mail: [email protected] 

 

Hours of Operation

 

Monday-Thursday 8.00am to 5.30pm 

Friday 8.00am to 2.00pm 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The above Avery Dennison literature provides information to the user for proper application, storage and other requirements. Please refer to Product Data 
Bulletins or your local Avery Dennison Representative for warranty information. Find the latest information on the Avery Dennison website, 
www.reflectives.averydennison.com

. We encourage you to check our website periodically for updates. 

 
All statements, technical Information and recommendations about Avery Dennison products are based upon tests and information believed to be reliable, but do 
not constitute a guarantee  or warranty of any kind. All Avery Dennison products are sold with the understanding that Purchaser has independently determined 
the suitability of such products for its intended and other purposes. 
 
For technical questions, please contact 

[email protected] 

 

Instructional Bulletin #1.00 

TrafficJet™ Purex Fume Extractor

 

Page 6 of 6 

reflectives.averydennison.com

 

Summary of Contents for TrafficJet Purex







Reviews: