Avery Dennison Power Stacker, Manual

Page: 7 / 39

User / Service Manual Power Stacker
10/06 Rev. 1.09
7
Move the diode connector into the plug on the rear side of the TDI !
Attention: If your TDI is not equipped with a connector like that – the unit can be
retrofitted easily. Please call your service technician, this work can not be
done by yourself.
Assemble light cover
To protect the sensor (infra red) in the power stacker against normal light – a light cover is
delivered together with the power stacker.
If you recognise that light is influencing your power stacker, maybe the platform is moving up
and down without reason, you should mount the light cover ! We recommend to mount the
cover in every case.
Remove the film from the glue parts – remove the film from the complete cover and stick it to
the cover of the TDI (as shown on the picture)
light cover
diode connector