1-2
Operating Instructions
Fuse
Charger P ow er S w i tch
P ow er I nl et
24V Charge r
Attaching the Hanging Folders
Follow the steps below to attach the hanging folders to the
9876 MW S. .
1.
Remove the following items from their packaging:
(1) file folders
(4) 3/8" plastite screws (may already be attached to
panel)
2.
Use the assembly instructions provided with the file
folders to assemble folders to the MW S panel.
3.
Tighten the screws.
C o n n e ct i n g t h e P o w er C o r d
Connect the charger's power cord to the power inlet. Power cords are not included with
International models.
Note:
The charger’s power switch does not control the MW S power. The MW S power switch
located on the power panel controls power to the MW S and connected devices.
R o u t i n g t h e C ab l e s ( 9 87 8 M W S )
Use the four access holes to route the
cables on the MW S.