Fastener Breaks off in Tool and/or Jams:
Clearing Fastener Remnants
Clearing Fastener Jams in the Feed Track
Spare Parts List
!
FINE FABRIC™ SYSTEM 500™
HAND TOOL (SKU# 16010-0):
1) Loosen front Screw
counter clockwise for
3-4 turns
2) Slide Nose Insert out
by pivoting it down while
pulling forward and clear
fastener/s out
3) Replace Nose Insert
and tighten screw.
DO
NOT OVER TIGHTEN
Front Screw
1) Remove the two screws
and washers.
2) Pull off the Filament
Wheel and Blade Insert.
Clear jammed fasteners
3) Replace Blade Insert
and Filament Wheel and
tighten screw.
DO NOT
OVER TIGHTEN
Both Screws
Remove jammed
fastener
Filament Wheel
Blade Insert