11/07 Rev. 4.03-01
USER-/SERVICE MANUAL
Technical Data
AP 7.t
4
Punch sensor
Transmission sensor
, detects punches or gaps in the label material; adjusta-
ble from the left side about half of the material width (Tab. 2).
Reflex sensor
•
Optional available
•
Detects reflex marks on the label material (normally dark marks on light
background)
•
Adjustable from the left side about half of the material width.
[2]
Measures and setting range of the punch / reflex mark (c = setting range, b = punch
length, a = punch width).
Fonts
•
19 Fixsize fonts , including OCR-A and OCR-B, including 2 fonts with textile
symbols
•
3 scalable fonts (Speedo fonts)
•
Truetype fonts are supported
•
Optionally can Truetype, Speedo and Fixsize fonts be stored on a CF-card
Modifying Fonts
•
Up to factor 8 scaling in x/y direction
•
Rotation by 0, 90, 180 and 270 degrees
Measure Transmission
Reflex
Setting range
c
Material zero line up to
60 mm
(Material zero line +
6 mm) up to 66 mm
Punch length
b
0.8–14 mm
4 mm (recommended)
Punch width
a
min. 4 mm
12 mm (recommended)
[Tab. 2]
Recommended punch dimensions.
a
b
c
Z021
1.cdr
Punch / Reflex mark
Punch sensor
Label web
Material zero line
