11/07 Rev. 4.03-01
USER-/SERVICE MANUAL
Technical Data
AP 7.t
2
Device Types, Application
AP 7.t
•
Intended purpose: Monotone printing of textile labelling materials for thermal
and thermotransfer processes
•
Processing roll material
•
Resolution: the AP 7.t is
optionally
available with 203 or 300 dpi resolution
•
Print speed up to 200 mm/sec (8”/s) with the AP 7.t (203dpi) or
up to 150 mm/s (6“/s) with the AP 7.t (300dpi).
•
Print width up to 104 mm with the AP 7.t (203dpi) or
105 mm with the AP 7.t (300dpi).
•
Interfaces: RS -232, USBCentronics, Ethernet
Options
Internal Options
…should be factory-fitted or installed by a service engineer:
•
Reflex Sensor Kit
: Light barrier fitting that apart from the transmission sensor,
also contains a reflex sensor.
•
I/O board
: RS- 422/485 interface, signal interface
External
Options
…do not require any special alterations to the printer:
•
Cutter
•
TCS (Textile Cutter-Stacker)
•
(External) rewinder
for material rolls with 38 mm (1.5”), 75 mm (3”) or 100 mm
(4”) cores
•
Keyboard
for standalone operation
