05/09 Rev. 5.02-01
USER MANUAL
Setup & Operation
AP4.4 – AP5.4
16
– Additionally, directs to deeper levels within the menu structure and se-
lects menu items
– Enlarges values
F
Prog Button
– Calls up the parameters menu when offline
– Goes back one step in the parameters menu, and/or quits the parame-
ters menu.
For more detailed descriptions of the button functions, please see
•
Sections
Operation in Offline Mode
on page 21 and
Operation in Online
Mode
on page 22.
•
Section „Info-Printouts and Parameters”.
Operating State
Offline Mode
No jobs are waiting to be processed.
Printer settings can be made when the device is offline. The offline mode is
normally active when the printer is switched on. Print jobs are received, but not
processed, via the selected interface.
¯
To adjust the printer so that it goes online directly after you have switched
it on, set
SYSTEM PARAMETER > Turn-on mode
to
Online
:
Online Mode
In the online mode, print jobs are received and processed immediately.
•
No jobs are waiting to be processed.
•
Current data transfer to the printer is shown on the display: This is indicat-
ed on the right, underneath the number of loaded jobs.
Another point on half line height above the first shows the interpreter sta-
tus:
–
No point:
No data to interpete.
–
Solid point:
The interpreter is busy (still data left in the spooler).
–
Flashing point:
The interpreter is waiting for data required to complete
a command (no data in the spooler).
•
During printing, the display also shows the number of print jobs read (13)
and the remaining number of labels (25) to be printed in the current job.
•
If a print job recognizes an infinite number of labels to be printed, then the
remaining number for this job is also shown as infinite.
OFFLINE 0 JOBS
ONLINE 0 JOBS
ONLINE 0: JOBS
ONLINE 13 JOBS
Restcount: 25
ONLINE 13 JOBS
Restcount: endless
