Troubleshooting
▀
Paper/Output
▀
(Speed)
Print quality
Normally, when the printer is in abnormal condition, the "POWER"
LED will keep blinking. The printing work and the communication
between the host and printer will stop.
(Darkness)
Default Document menu
To understand the problem, please check both
click "Advanced"
LEDs first:
click each item to
select desired
A. Power and Ready LEDs blink at the same tempo
parameter
click "OK"
Power LED Ready LED
ON ON
OFF
OFF
▀
Create a new size
Please refer to the
procedure of create a
new size on Win 2000.
Possible
Problems
Solutions
Remarks
Miss-detect the gap
. Check the label path
. Check the label sensor
If you are using
continuous label roll
and run under
Windows, you should
select the continuous
media.
Label stock out
. Supply the label roll out
Label stock not
installed
. Install the label roll
Label jam
. Recover the jam
43
44
