Avery Dennison® is a registered trademark of Avery Dennison Corporation.
©2013 Avery Dennison Corp. All Rights Reserved.
TC9417PHI Rev. AB 6/15
R E P L A C I N G T H E P R I N T H E A D
Use these instructions to replace the printhead assembly in the 9417 Printer.
A u d i en c e
These instructions are intended for a skilled service
technician only. For additional information or
assistance, call Service at 1-800-543-6650.
C a u t i o n s
♦
The 9417 printer contains devices that are
sensitive to electrostatic discharge (ESD); failure
to exercise caution can damage the printer. W e
recommend using an ESD wrist strap, grounding
mat, or grounding workbench when performing
maintenance on the printer.
♦
Flex connectors between components and board
assemblies are extremely fragile; when damaged,
they require component or board assembly
replacement.
R e q u i r ed T o o l s
The procedures require the following:
♦
A hard, dry surface to set the printer on
♦
Phillips screwdriver
R e mo v i n g t h e P ri n t h e ad
1.
Turn off the printer and unplug it from the electrical outlet.
2.
Open the front cover.
3.
Remove the supplies.
4.
Remove the six screws that attach the print module covers.
5.
Lift up the right then left printer cover; rest them out of the way.
