2
Replacing the Printhead
6.
Lift out the printhead assembly.
7.
Open the four black flex connector latches. Remove the flex from the flex connector
Note:
Apply careful, even pressure on the latches when opening and closing.
I n s t al l i n g t h e P ri n t h e ad
1.
Make sure the four black flex connector latches are open, then insert the printhead flex into the
flex connector. Make sure the flex is inserted all the way into the connector.
2.
Close all four of the black flex connector latches.
Note:
Apply careful, even pressure on the latches when opening and closing.
3.
Lay the printhead assembly into place.
Fl ex Connec tor Lat ch
