Avers Screens BETA User Manual Download Page 2

 2

Table of contents: 

1.

 Safety rules

       

1.1. Declaration of Conformity CE

2.

 Product specification

       

2.1. Contents of package

       

2.2. Technical data

3. Control system installation

3.1 Installation directions
3.2 Control unit installation
3.3 Electric installation
3.4 Control system programming

4.

 Control system operation 

4.1 Automatic operation
4.1 Manual operation
4.2 Control system maintenance
4.3 Before asking for service

5. Warranty conditions

1. SAFETY RULES

SAFETY INFORMATION

NOTICE: Important safety information. It is important for the safety of persons to follow these instructions. 
                After reading the manual, please save it just in case of need in the future.

Ÿ

Do not allow children to play with the remote control transmitter or fixed manual switch connected to the control system.

Ÿ

    Keep the remote control transmitter out of reach of children.

 

SAFETY INFORMATION

NOTICE: Important safety information.
 
Follow the instructions described in the operating manual for safety reasons. After reading the manual, please store 
it in a safe place just in case you need it in the future.

NOTICE: THE DEVICE HAVE TO BE EARTHED.

WARNING:
1) Disconnect the device from the power supply if it will not be used within longer period of time.
2) Do not open the casing of the device in order to avoid possible electric shock. There are not any user operated 
    parts inside the case of the screen. All service work can be done by Avers Authorized Service Center personnel 
    only.

Dear Customer,

Thank you very much for the purchase of our product. The manual booklet contains all operation information 

you may require to install properly and operate the radio remote control system. We hope it will help you  to get the most 
enjoyment of your new control system. Enjoy time with the 

Avers Screens 

product.

Summary of Contents for BETA









Reviews: