48
Manually Scanning Specific FM Channels
Instead of scanning all channels, you can choose to manually scan one
or a few channels only. To do this, follow these procedures.
To manually rescan specific FM radio channels:
1. Click
the
Setup
button
and click the
FM Radio
tab.
2. To manually scan two or more consecutive channels, you can
enable the
Save and Next Channel Scan
check box.
3. Click on the channel you want to rescan in the
Channel List
.
4. Click to scan upward or
to scan downward from the
selected channel frequency. The scanning will stop when the
application finds the closest ACTIVE FM frequency.
5. Click
the
Save
button if you’d like to keep the newly scanned
frequency.
6. If
the
Save and Next Channel Scan
check box is enabled in Step 2,
the application will automatically scan the next succeeding channel
each time after the
Save
button is pressed. Click the
Stop
button
when you want to stop the scanning operation.
Channel Versus Frequency Selection
You can tune to FM radio by channel or frequency.
By default, the Numeric Panel allows you to select memorized radio
channels, as indicated by the
Channel
button
on the panel.
You can switch to selecting radio frequencies by clicking the
button. When you see the button change into the
Frequency
button
, clicking on the number buttons on the Numeric Panel allows you
to select radio frequencies.
