
AVerMedia AVerKey500 Pro User’s Manual
28
Panning to Other Parts of the Zoomed Image
1. Check and see if the
PAN/POS
LED on the
AVerKey500 Pro
front panel
is OFF. If it's not, press the
PAN/POS
button to switch to
PAN
mode.
2. Press on the
Directional Buttons
to view other parts of the zoomed
image.
Adjusting the Image Position
1. Check and see if the
PAN/POS
LED on the
AVerKey500 Pro
front panel
is ON. If it's not, press the
PAN/POS
button to switch to
POS
mode.
2. Press on the
Directional
Buttons
to move the image up, down, left, or
right.
The LED Panel
At the front panel of the
AVerKey500 Pro
, you will find the
Infrared Sensor
and
several
LEDs
. Each LED shows you whether or not a particular function or
operating mode is active. The figure and descriptions below explain what each
LED represents.
Summary of Contents for 500
Page 1: ......
Page 16: ...Chapter 2 Hardware Installation and Setup 13 ...