AVer M15W, Instruction Manual

Page: 7 / 104

English-3
LED Indicator
Power
Solid green: Power on
No light: Power off
Solid red: Standby mode*
* Standby mode is supported when power plugged in.
Wi-Fi
Solid blue: AP Mode Ready / STA connected
Slow flashing blue: Software connection with camera
Short flashing blue: Create AP mode / STA connecting
Solid green: Miracast mode ready
Slow flashing green: Miracast streaming start
Quick flashing green: Miracast device scan / connecting
Battery
Solid green(x3 ) : Battery is full(100% ~ 60%)
Solid green(x2 ): Battery is 60% ~ 30%
Solid green(x1 ): Battery is 30% ~ 5%
Solid red (x1): Battery is 5% ~ 0%
Flashing red (x1): Battery is out of power
Solid orange(x3): Battery is abnormal
[Note]
The battery will be exhausted for long-term usage. Do not replace the
battery yourself. Please contact your dealer.
Compound Key
Press and hold for 3 seconds to operate the compound key function.
: Display system information and battery power status.
: Snapshot the current screen image to software or
cloud.
Press keys to operate the compound key function.
: Back to factory default settings.
: Press to switch between following modes:
- Auto detects the best resolution(4K, 720P, 1080P)
- 1024x768 (If HDMI device support)
- 4K 60Hz (If HDMI device support)
:Press to switch between following modes:
- Normal: Adjust the gradient of image.
- Motion: Increase frame rate. Sufficient lighting is
required when using this mode.
- High quality: Better image quality.