AVer CP2 Series, User Manual

Page: 8 / 120

WARNING

Do not put weights (such as the product itself) on the power cable.

Do not drag the cable forcibly when you pull out the power plug. If the
power cable is damaged, please contact the local distributor to repair
or replace it.

The power cable in the accessory box is for this product only. Don't
use it on other devices.
Put the product on a stable surface.
An unstable surface includes and does not limit to an inclined plane, a
shaky stand, desk or platform, which might cause the turnover and
damage.
Use the battery correctly.

Galvanic corrosion, electric leakage and even fire may be caused by
improper battery usage.

It is recommended to use the designated type of battery and install the
battery by correct electrodes (positive and negative electrodes).

Do not install and use new battery together with the used one.

Take out the battery if the remote control is not used for a long period.

Do not expose the battery under overheated environments such as
sunlight and firing.

Dump the used battery based on local regulations.
Do not open the cover or change the product by your own.
High voltage components are installed in the product. When you open
the cover, high voltage, electric shock or other dangerous situations may
occur. If inspection, adjustment or maintenance is required, contact the
local distributor for help.
Use the specified power supply.

Do not use any types of power cables other than the one provided with
the product to prevent the product from being damaged.

Use a three-wire socket and ensure that it is properly grounded.

Pull out the power plug from the socket if the product is not used for a
long period.