AVer CP2 Series, User Manual

Page: 13 / 120

5. Do not attempt to install or assemble this product if the product or hardware is damaged
or missing. In the event that replacement parts or hardware are needed, please contact
Customer Service.
6. When drilling holes into the wall, make sure you use a drill and drill bit with the specified
diameter. Ensure that you also follow the instructions regarding the depth of the holes.
Otherwise, the product may be installed incorrectly and cause safety issues.
7. Do not clean the product with a wet towel, and do not place a heater, or humidifier
beneath it. Moisture, steam or heat permeating into this product may result in fire,
electric shock or product damage.
Safety tips for installation
1. At least 2 professional installers should on site when installing the wall mounting bracket
and the IFP. To prevent injury and damage to the wall and device, user should not
perform the installation without professional guidance.
2. The installation position should be on the wall that can bear the weight of the IFP and
bracket, and measures should be taken to calculate the effects of other external forces.
3. To avoid accidental damage to the device and human safety, please install the bracket in
a place which avoids the contact of children.
4. When the installed screws become loose, please turn off the device and unplug the
power cord for further check.
5. The bracket should be installed on a vertical flat surface.
6. For the best working performance, these places should be avoided: strong electric field,
strong magnetic field and potential leakage of inflammable gas.
7. For the best panel viewing, the bracket should be installed in the place where the direct
intense light and reversed light situations should be avoided.
8. In case of fire, please avoid the places as described below: heavy soot, windy and dusty
place, intense humidity and intense heat.
9. During installation, please make sure connection between the screws and bracket are
secured firmly.
This instruction should be strictly followed. The ma
nufacturer isn’t responsible for
any
damages and lost caused by inappropriate installation and operation.