UVC Ultraviolet Sterilization and Purification Lamp
TM
Date: 22 January 2021
Page 8 of 8
Rev A
Safety Precautions:
The following basic safety measures must be observed at all stages of operation, maintenance and repair of this equipment. Failure to
observe these measures may affect the basic protection provided by the equipment.
1.
Please use under the working conditions and environment required by this manual.
2.
Unauthorized use of this product is strictly prohibited
3.
Non-professionals are not allowed to open and repair by themselves, so as not to damage precision electronic components
4.
Do not connect multiple electrical equipment with a total power exceeding its rated wattage on one socket board, because
overload will cause insufficient power or click, fire accident.
5.
This product is not waterproof, please do not use this product in rain or water vapor, otherwise it is easy to damage the device or
get injured.
6.
Do not use this product near fire, and do not hit or shake this product.
7.
Strong ultraviolet rays are harmful to the human body, please pay attention to ultraviolet radiation. When using, it is strictly
prohibited to directly irradiate the human body with ultraviolet rays.
8.
The sterilizer is maintained by professionals. Wear protective glasses when disinfecting under ultraviolet light with a peak
wavelength of 253.7nm, and wear protective clothing when necessary to avoid direct exposure to human skin, mucous
membranes and eyes.
9.
It is strictly prohibited to use in places where flammable and explosive substances are stored.
10.
The power plug should be unplugged during maintenance or standby.
11.
The storage environment should be: Relative humidity <80%, no corrosive air and light should be upward during transportation.
Within 1 year after the purchase date, you can get free warranty service if the defective caused by the manufacturing process, technology,
and components.
The free service cannot be obtained under the following circumstances:
1.
Beyond the effective service or free maintenance period.
2.
Man-made damage caused by improper use. For example, improper installation, use not in accordance with the instructions,
damage caused by incorrect use, etc. Damage caused by transportation or other accidents. Other damage caused by force
majeure (such as natural disaster, abnormal voltage, etc.)
3.
The normal product aging, wearing, etc., which does not affect the normal use of the product.
Other non-product design, technology, manufacturing, quality and other problems cause failure and damage.
