Avenview W-HDM3D5G-20M, User Manual

Page: 12 / 13

Page|12
www.avenview.com
8. GENERAL TROUBLESHOOTING
SECTION 2: SPECIFICATIONS
ITEM DESCRIPTION
UNITS W-HDM3D5G-S-20M (Transmitter) W-HDM3D5G-R-20M (Receiver)
UNIT DESCRIPTION WIRELESS Transmitter WIRELESS Receiver
OPERATING FREQUENCY 5.1GHz to 5.9 GHz 5.1GHz to 5.9 GHz
RF COMMUNICATION MIMO MIMO
AUDIO FORMAT
SUPPORTED
PCM,DTS,DOLBY DIGITAL
SUPPORTED RESOLUTION
& DISTANCE
TV-Up to 480P,576P,720P,1080i1080p60Hz @ 20 meters (66 feet)
PC Up to 1920x1080 Pixels
HDMI CONNECTOR HDMI FEMALE Plug (input) HDMI FEMALE Plug (input)
ANTENNA High Performance Internal Antenna
IMAGE DELAY <1ms
IR CMFS 38KHz
MODULATION OFDM
TRANSMISSION POWER 12dBm+- 2dBm
DIMENSIONS (L X W X H) 11.5” x 1.3” x .5”
POWER SUPPLY AC Input 100-240V,DC Output 5V
ENVIRONMENTAL
OPERATING
TEMPERATURE
32˚ ~ 104˚F (0˚ to 40˚C)
STORAGE TEMPERATURE -4˚ ~ 140˚F (-20˚ ~ 60˚C)
RELATIVE HUMIDITY 20~90% RH (no condensation)
PROBLEM POSSIBLE SOLUTION
THE WIRELESS OR VIDEO
LINK LED IS NOT LIT

If the transmitter and /or Receiver are positioned horizontally
move the units to vertical position. Power cycle both extender
units
(OFF 30 sec then ON).

Reduce the distance between the Transmitter and Receiver
units. Power cycle both extender units

(OFF 30 sec then ON).
THE SCREEN IS BLANK

Re-check all connections and verify they are in the correct
positions and verify the units are powered.
 Check that the wireless and Video Link LEDs are LIT
THE IR EXTENDER DOES NOT
WORK

Check the IR Extender cable is connected to the Transmitter
unit
 Check that the IR EYE is visible and not being obstructed and
the transmission of IR from the remote can be sent.

Reposition the IR Flasher to another location near the IR port
of your source device