Page|3
www.avenview.com
SECTION 1
: GETTING STARTED
1.1
IMPORTANT SAFEGUARDS
Please read all of these instructions carefully before you use the device. Save this manual for
future reference.
What the warranty does not cover
Any product, on which the serial number has been defaced, modified or removed.
Damage, deterioration or malfunction resulting from:
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product
modification, or failure to follow instructions supplied with the product.
Repair or attempted repair by anyone not authorized by us.
Any damage of the product due to shipment.
Removal or installation of the product.
Causes external to the product, such as electric power fluctuation or failure.
Use of supplies or parts not meeting our specifications.
Normal wear and tear.
Any other causes which does not relate to a product defect.
Removal, installation, and set-up service charges.
1.2
SAFETY INSTRUCTIONS
The Avenview VGA-C5A-R, VGA and Audio Extender over Single CAT5/CAT6 with RGB Delay Control has
been tested for conformance to safety regulations and requirements, and has been certified for international
use. However, like all electronic equipments, the VGA-C5A-SET should be used with care. Read the
following safety instructions to protect yourself from possible injury and to minimize the risk of damage to
the unit.
Do not dismantle the housing or modify the module.
Dismantling the housing or modifying the module may result in electrical shock or burn.
Refer all servicing to qualified service personnel.
Do not attempt to service this product yourself as opening or removing housing may expose you to
dangerous voltage or other hazards
Keep the module away from liquids.
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid
falls or spills on to the housing, unplug the module immediately.
Have the module checked by a qualified service engineer before using it again.
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before
cleaning.
