4
.
Setting a Static IP on Computer
Before
logging into the HDM-XTRM-IP devices
, please ensure
a
ll devices are in the same network segment. To verify
and properly control the devices, please set a static IP on your computer. See the instructions below
for more details.
The
Encoder and Decoder
units are pre-configured with AutoIP. Upon connecting the units to a stand alone network
switch (without router attached), the units will be on IP address range at
192.168.1.11
and subnet mask 255.255.0.0.
Set your computer's IP address as
192.168
.X.X and subnet mask as 255.255.0.0.
A Windows 7 PC/Laptop is used as an example to configure a static IP address.
1.
Click
Start
.
2.
Choose
Control Panel
>
Network and Internet
>
Network and Sharing Center
>
Change
Adapter Settings
, right click
Local Area Connection
, and then choose
Properties
.
www.avenview.com
10
