Avenview HDM-C5SP-8SRSR, User Manual

Page: 4 / 14

www.avenview.com 4
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
The Avenview HDM-C5SP-8SR HDMI 1.3 over Single CAT5 Cascading Distribution Amplifier provides the most
flexible solution by which the high definition video and high quality audio can be transmitted to different
locations over a long distance. The devices are cascadable, allowing you to extend HDMI compliant displays
almost anywhere. The 2 input HDMI source (only 1 input can be used at a time) can be duplicated and
distributed to up to 8 HDMI enable displays through cost effective Cat-5/5e cables and RJ-45 to HDMI
mini-extenders HDM-C5-R-M. With the built in equalization, the input HDMI cable can be extended up to 20
meters (66 feet) long under Full HD, and make the overall transmission distance superior than regular HDMI
splitters or matrix switches in the market.
- Silicon Image chipset embedded for best quality, compatibility and reliability
- HDMI 1.3c compliant
- HDCP compliant
- Regenerates the HDMI signal
- Acts as 2X1 HDMI Switch and 1X8 HDMI over CAT5 Splitter
- HDMI video distribution to up to 7 displays and one CAT5e Receiver or cascade to another
HDM-C5SP-8SR
- Supports default HDMI EDID and has the ability to learn the EDID of the displays
- Input up to 15m (50ft) using HDMI cables
- Extends up to 60m (200ft) (720p / 1080i) of output CAT5/6 cable
- Outputs up to 15m (50ft) using HDMI cables
- Pure unaltered uncompressed 7.1ch digital HDMI over LAN cable transmission
- Allows cascading
- 1U rack mountable with interlocking power adapter for fixedness
- Perfectly integrated with other HDM-C5XD Series products