Avenview HDM-C5SP-4, User Manual

Page: 4 / 13

www.avenview.com 4
1.3 Regulatory Notices Federal Communications Commission (FCC)
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed
to provide reasonable protection against harmful interference in a residential installation.
Any changes or modifications made to this equipment may void the user’s authority to operate this
equipment.
1.4 Introduction
The Avenview HDM-C5SP-4 HDMI 1.3 over Single CAT5 Distribution Amplifier provides the most flexible
solution by which the high definition video and high quality audio can be transmitted to different locations
over a long distance. The devices are cascadable, allowing you to extend HDMI compliant displays almost
anywhere. The 2 input HDMI source (only 1 input can be used at a time) can be duplicated and distributed to
up to 4 HDMI enable displays through cost effective Cat-5/5e cables and RJ-45 to HDMI mini-extenders
HDM-C5-R-M. With the built in equalization, the input HDMI cable can be extended up to 20 meters (66 feet)
long under Full HD, and make the overall transmission distance superior than regular HDMI splitters or matrix
switches in the market.
- Silicon Image chipset embedded for best quality, compatibility and reliability
- HDMI 1.3c compliant
- HDCP compliant
- Regenerates the HDMI signal
- Acts as 2X1 HDMI Switch and 1X4 HDMI over CAT5 Splitter
- Supports default HDMI EDID and has the ability to learn the EDID of the displays
- Supports default HDMI EDID and has the ability to learn the EDID of displays
- Extends up to 20m (66ft) of input HDMI cable
- Extends up to 60m (200ft) (720p / 1080i) of output CAT5/6 cable
- Extends up to 40m (130ft) (1080p) of output CAT5/6 cable
- Pure unaltered uncompressed 7.1ch digital HDMI over LAN cable transmission
- Allows cascading
- 1U rack mountable with interlocking power adapter for fixedness
- Perfectly integrated with other HDM-C5XD Series products