www.avenview.com
Page 9
6.
INSTAllATION (HBT-C6pOE-R)
To setup Avenview HBT-C6POE-R please follow these steps for connecting to a device:
1. Turn off all devices including monitors / TV
2. Connect to a HDMI source (such as a Blu-Ray Disc player) to the Transmitter HBT-C6pOE-Sp4/8 or Matrix 4x4/8x8
3. Connect HBT-C6pOE-R 100m or HBT-C6pOE-Rl 60m with a CAT5/6/7 cable with shielded ends, then connect to
display with HDMI cable.
4. plug in the IR BlASTER: into IR out and the blinker on the IR eye (Source)
5. plug in power for the Tx.
6. plug in the IR Extender to IR IN to receive IR Signals from Remote
7. power on the HDMI display
8. power on HDMI Sources.
Notice
NOTE:The QUALITY and TRANSMISSION of the video signals depends on
the characteristics and quality of the UTP cables. Higher resolutions and
longer transmission distances require low skew cables (<25ns/100m) for
best performance.
Unshielded CAT6 with metal RJ-45 connectors is recommended.
