www.avenview.com
Page 7
4.
pANEl DESCRIpTION
INPUT PANEL (Receiver, HBT-C6POE-R) Front
1.
HDMI OuT: Connect to HDMI display Max 35ft via
HDMI Cable or cascade with another Avenview type
Transmitter
2.
2. lAN: Connect to Internet service sharing rate of
100Mbps within the link of Transmitter
3.
3. RS-232: Connect to a device that has the ability to Receive control commands via RS232 only with compatible
Transmitters.
INPUT PANEL (Receiver HBT-C6POE-R) Rear
4.
IR 2 Blaster: plug the IR Blaster cable for IR signal being
transmitted. place IR Blaster within direct site of the
device being controlled.
5.
IR 1 Extender: plug the IR Extender cable for IR sig-
nal being received. place IR Extender within direct
line of site with the IR Remote.
6.
lED: Illuminate when both the input and output signals
are in sync.
7.
CAT5e/6/7 IN Connect CAT5e/6/7 cable to extend
the signal up to 100m (330ft)
1
3
2
4
5
6
12
