www.avenview.com
Page 4
2.2
pACk AGE CONTENTS
Before you start the installation of the converter, please check the package contents.
1
Displayport Extender Cable with
Transmitter and Receiver
X 1
2
u ser’s Manual
X 1
2.3
BEf ORE INSTAll ATION
•
put the product in an even and stable location. If the product falls down or drops, it may cause an injury or malfunction.
•
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high humidity.
•
u se the DC power adapter with correct specifications. If inappropriate power supply is used then it may cause a fire.
•
Do not twist or pull by force ends of the optical cable. It can cause malfunction.
3.
OPTICAL FIBER HAZARD
•
P
ersons installing fiber optic products must take all necessary safety precautions, such as wearing protective clothing and
goggles and observing warning signs.
•
To ensure that the required personnel and equipment is properly installed, secure from unnecessary failure of the
components or failure of the whole system, injury to one’s self and in addition to legal responsibility; everyone is
responsible for his own health
•
K
eep exposed optical fiber ends away from skin and eyes.
•
The waste fragments should be treated with care and not picked up with bare hands, but rather with special gloves.
•
Dispose of waste in a suitable container via an approved agency. Make sure that the quantity of optical fiber waste is
minimized.
•
Closures containing termination points for optical fiber cabling must be labeled with appropriate warning signs or clearly
visible text.
•
Make sure that the quantity of optical fiber waste is minimized. Closures containing termination points for optical fiber
cabling must be labeled with appropriate warning signs or a clearly viewable text.
•
There are four laser Classifications based on risk levels. laser
manufacturers are required to label their lasers accordingly.
