VENDOMA DVR
t
1 Connect audio input cable
2 Connect video input cable
3 Connect TV-OUT cable
4 Connect sensor relay cable
5 Connect Watchdog cable
Assembly View
Note:
1. After connecting the Watchdog cable, the other end of the cable must be plugged in to the
Reset pin of the PC’s motherboard. The Reset switch from the PC must be plugged in
next to the Watchdog on the DVR card.
2. If the Watchdog cable and/or the Reset switch are connected incorrectly, the system will not
reboot and you may not have video. Try reconnecting the pins to restore the video.
9
