manualshive.com logo in svg

Aventics Marex ECS, Assembly Instructions Manual, Page: 44 / 60

Share
Download
Aventics Marex ECS Assembly Instructions Manual Download Page 44

Commissioning

AVENTICS

 | ECS Actuator | R417002911–BDL–001–AA

43

En

g

li

s

h

5.

Push switch S3 to confirm the setting. The red and greed 
LEDs stay on for a short time. The position is stored.

6.

Move the lever of the actuator manually so that the 
adjustment lever of the throttle is in the MAXRPM position.

7.

Push switch S3 to confirm the setting. The red and green 
LEDs stay on for a short time. The position is stored.

8.

Set switch S2 to "OFF". The teach-in process is complete. 
The actuator is ready for use now. The red LED is off. The 
green LED is permanently illuminated.

9.

With twin engines, proceed accordingly with the second 
actuator for the throttle control.

Assembly, setting and commissioning of the MarexECS 
Actuator are now complete. 

O

Test all system functions first at standstill then at slow 
speed.

You will find further information in the MarexECS 
QuickGuide, see also chapter 1.2.

OFF <--- ON

Summary of Contents for Marex ECS





























































Reviews:

No comments