Safety instructions
AVENTICS
| Marex 3D | R417003106–BDL–001–AA
7
Eng
lish
2
Safety instructions
2.1
About this chapter
The 3D Controller has been manufactured in strict compliance
with the generally accepted rules of technology. However, this
does not exclude the risk of damage to persons or property if the
general safety instructions in this chapter and the safety
instructions in this document are not observed.
O
Read these assembly instructions completely and carefully
before mounting the 3D Controller.
O
Keep these assembly instructions in a location where they
are accessible to all users at any time.
O
Always include these assembly instructions when passing
the 3D Controller on to third parties.
2.2
Intended use
The 3D Controller is used to process analog and digital control
signals within the ship control system Marex 3D. It is designed
for the application in the engine room on board of boats, yachts
and commercial vessels. The 3D Controller must only be
operated together with components of Marex 3D under the
conditions described in these assembly instructions and under
observance of the instructions for the Marex 3D system.
A separate emergency stop switch must be provided on every
control station.
O
Comply with the operating conditions and performance
limits stated in chapter 11, Technical data.
Intended use includes having fully read and understood this
manual and especially chapter 2.
2.3
Improper use
Any use other than as described in "Intended use" is improper
and thus inadmissible.
If, in applications relevant to safety, inappropriate products are
installed or used, unintended operating conditions can be
