Aventics Marex 3D 531, Assembly Instructions Manual

Page: 8 / 28

Safety instructions
8 AVENTICS | Joystick Type 531 | R417003072–BDL–001–AA
A separate emergency stop switch must be provided on every
control station.
O
Comply with the operating conditions and performance
limits stated in chapter 11, Technical data.
Intended use includes having fully read and understood this
manual and especially chapter 2.
2.3 Improper use
Any use other than as described in "Intended use" is improper
and thus inadmissible.
If, in applications relevant to safety, inappropriate products are
installed or used, unintended operating conditions can be
created in the application which may cause damage to persons
and/or property. Therefore only apply a product within
applications relevant to safety if this kind of use is clearly
specified and permitted in the product's documentation as for
example within explosive areas or in parts of a control system
which are relevant for functional safety.
Unintended use of the product does also include:
W
connecting the Joystick Type 531 to unsuitable supply
voltage (see chapter 11, Technical data)
W
combining the Joystick Type 531 with further components
which are not suitable for that purpose,
W
exposing the Joystick Type 531 to ambient conditions which
are not admissible (see chapter 11, Technical data).
AVENTICS declines any responsibility for damage resulting
from unintended use. The user of the equipment is fully
responsible for any risk arising from unintended use of the
product.
2.4 Personnel qualifications
The activities described in these assembly instructions require
basic knowledge of mechanics and electrics as well as
knowledge of the corresponding terminology. To ensure the
safe use of the product, those activities may only be performed