Installation
Fold
Fold
Side
Front
1.Mark the holes on the door
according to the template, and
then drill the holes.
35mm
35mm
35mm
20mm
20mm
2.Install the mortise and fasten it
with screws. Install the strike box
and strike and fasten them with
screws.
3.Install the spindle in the front panel,
and then fasten it with screw. Install
the connection rods on the front
panel. There are marks on the spindle
hole, for Left handle, put the “L” mark
on the right side, for Right handle,
put the “R” mark on the right side.
5.take down the battery case
and install the batteries.
4.Install the front panel on the door
2
+
1
.
5
V
-
+
1
.
5
V
-
+
1
.
5
V
-
+
1
.
5
V
-
6.Install the back panel and fasten the
screws with the front panel. After that,
test the installation and make sure it is
correct.
Left Handle:
Right Handle:
R
L
move the L to the right side
move the R to the right side
L
R
